Feed
Spandex, Lycra or elastane is a synthetic fibre known for its exceptional elasticity. It is stronger and more durable than rubber, its major non-synthetic competitor.[citation needed] It is a polyurethane-polyurea copolymer that was invented in 1959 by chemist Joseph Shivers at DuPont's Benger Laboratory in Waynesboro, Virginia. When first introduced, it revolutionized many areas of the clothing industry.
The name "Spandex" is an anagram of the word "expands". It is the preferred name in North America; in many European countries it is referred to as "elastane". Other brand names associated with Spandex include Lycra (made by Invista, previously a part of DuPont), Elaspan (also Invista's), Creora (Hyosung), ROICA and Dorlastan (Asahi Kasei), Linel (Fillattice), and ESPA (Toyobo).
Spandex fibres are produced in four different ways: melt extrusion, reaction spinning, solution dry spinning, and solution wet spinning. All of these methods include the initial step of reacting monomers to produce a prepolymer. Once the prepolymer is formed, it is reacted further in various ways and drawn out to produce a long fibre. The solution dry spinning method is used to produce over 94.5% of the world's spandex fibres.
Solution dry spinning
Step 1: The first step is to produce the prepolymer. This is done by mixing a macroglycol with a diisocyanate monomer. The two compounds are mixed together in a reaction vessel to produce a prepolymer. A typical ratio of glycol to diisocyanate is 1:2.
Step 2: The prepolymer is further reacted with an equal amount of diamine. This reaction is known as chain extension reaction. The resulting solution is diluted with a solvent to produce the spinning solution. The solvent helps make the solution thinner and more easily handled, and then it can be pumped into the fibre production cell.
Step 3: The spinning solution is pumped into a cylindrical spinning cell where it is cured and converted into fibres. In this cell, the polymer solution is forced through a metal plate called a spinneret. This causes the solution to be aligned in strands of liquid polymer. As the strands pass through the cell, they are heated in the presence of a nitrogen and solvent gas. This process causes the liquid polymer to react chemically and form solid strands.
Step 4: As the fibres exit the cell, an amount of solid strands are bundled together to produce the desired thickness. Each fibre of spandex is made up of many smaller individual fibres that adhere to one another due to the natural stickiness of their surface.
Step 5: The resulting fibres are then treated with a finishing agent which can be magnesium stearate or another polymer. This treatment prevents the fibres' sticking together and aids in textile manufacture. The fibres are then transferred through a series of rollers onto a spool.
Step 6: When the spools are filled with fibre, they are put into final packaging and shipped to textile manufacturers.
If I looked like that last pic, I'd live in spandex. But it's not worth smoking for
smoking for me today 
...........
.........
